Choose Your Hardware
Raspberry Pi & CM4 Helium Miners
CM4 & Raspberry Pi
Supports all CM4-based Helium miners and Raspberry Pi devices. Uses a MicroSD card flashed with Balena Etcher — no special tools required.
SenseCAP M1
RAK Hotspot Miner
MNTD Miner
Nebra Indoor & Outdoor
Raspberry Pi 3 / 4
~20 minutes start to finish
View Installation Guide →
⬇ Download CM4 Image
Bobcat 300 — G290 & G295
Bobcat G290 & G295
Supports the Bobcat 300 G290 and G295 miners. Uses a Windows flasher app that flashes via USB directly to the miner's internal storage — no SD card needed.
Bobcat 300 G290
Bobcat 300 G295
⚠️
Not compatible with G280 or 285. Check the label on the bottom of your miner.
⚠️
One-way install. This flasher replaces the stock Bobcat firmware on the miner’s internal storage. To return to stock, you’ll need to reflash with a stock image from Bobcat.
~10 minutes start to finish
View Installation Guide →
⬇ Download Installer
Bobcat 285
Bobcat 285
Supports the Bobcat 285 miner. Uses a Windows flasher app that flashes via USB directly to the miner's internal storage — no SD card needed.
Bobcat 285
⚠️
Not compatible with G280, G290, or G295. Check the label on the bottom of your miner.
⚠️
One-way install. This flasher replaces the stock Bobcat firmware on the miner’s internal storage. To return to stock, you’ll need to reflash with a stock image from Bobcat.
~10 minutes start to finish
View Installation Guide →
⬇ Download Installer